How to Choose a Custom Wire Harness Manufacturer: A 9-Point Checklist for OEM Buyers
Price tells you what a supplier charges. These nine checks tell you whether the part will still match the drawing on the tenth shipment.
Learn morePractical answers for harness buyers and hardware engineers — how to specify, qualify and audit a custom wire harness supplier.
Price tells you what a supplier charges. These nine checks tell you whether the part will still match the drawing on the tenth shipment.
Learn moreBoth standards are quality management systems. Only one of them is written for automotive production parts — and the certificate scope decides more than the title.
Learn moreA battery pack harness is bought as a performance requirement, not a drawing. What the RFQ has to lock down, and where the schedule actually goes.
Learn moreA harness is a system of conductors, terminations and protection bundled into one assembly. That definition decides how it is bought, built and tested.
Learn morePPAP is the evidence that a part was made by the production process, not the prototype process. On a harness, five of its eighteen elements decide whether that was ever true.
Learn moreA harness supplier reproduces your drawing. An assembly supplier decides the construction — so the audit has to reach the design decisions, not stop at the process.
Learn moreFour decisions set the cost and the failure modes of a harness long before anyone crimps a terminal. Here is what each one has to answer.
Learn moreThere is no price list for a custom harness, because six variables decide it — and three of them are set by the buyer, not the supplier.
Learn moreIP67 and IP68 are not two points on one scale. The first is a defined test; the second lets the manufacturer define it — which is where selection goes wrong.
Learn moreThree materials, three different trade-offs, and one of them is not simply better than the others in any direction but temperature.
Learn moreA harness is built to a drawing; a cable assembly to a performance requirement. That difference decides how the part is specified, quoted and inspected.
Learn moreA drawing, a sample, a connector list or a photo is enough to start. Typical reply within one working day, with engineering questions rather than a sales pitch.